Medium Steam Type Pharmaceutical Autoclave With Pneumatically Operated Process Valves

Model

MD-0.8

Door number

Single door

Door type

Motorized Hinge Door

Chamber volume

800 liters

Chamber Size

61*91*145cm

Overall Size

135*190*179cm

Net Weight

1400kg

Steam

35Kg/cycle

Water

80Kg/cycle

Power(KVA)

3KVA

Sterilization cycles

P01 – Rubber plugs 121°С – 25 min;

P02 – Aluminum caps 121°С –15 min;

P03 – Clothing 121°С –15 min;

P04 – Liquid 121°С –15 min;

P05 –Program with free parameters (temperature, time)

Test cycles

Validation port

Control System Options

F0 Cycle: Calculates the sterilization time based
on load temperature and duration exposed. These
calculations are based on predetermined set
points. The result is controlled exposure time.

Load Probe: Used for temperature monitoring
that can be added through one of the included
validation ports.

Vessel Options

15 Ra. Polish: The internal chamber and door can
be polished to a 15 Ra. finish or better for critical
applications.

Chamber Passivation: An internal surface chamber
process that removes impurities inhibiting further
corrosion.

Piping Options

Sanitary Piping: 304 stainless steel, orbital
welding, sanitary piping, and process valves can
be added for high level sterilization.

Steam Source

Steam to Steam Generator: A heat exchanging
system used to create clean steam from a pure
water source and house steam or electric boiler
system. These systems are connected directly to
the chamber.

Process Options

Air Inlet Insitu Filter: An air inlet filter rated at 0.22
um. For use in high level sterilization.

Stainless Air Inlet Housing: A stainless steel
housing that allows the insitu filter to be sterilized.